It’s Martin again, with another doable DIY project for your backyard or your deck. Even though we are half past summer and most of us finished our landscape projects earlier in the spring, it’s time to think about fall planting. This planter box I’m going to demonstrate this week is made from Inteplast Building Products Fascia Board and Corner Board. Last month I showed you how to make an end table out of Inteplast’s products, so this is very similar in construction - a no brainer for you DIY pros out there, and a great beginner project for you folks who are just getting started. You can place this in your yard without worrying about rotting, splitting, cracking, or pests because Inteplast’s products are moisture resistant. So, let’s get started.
Materials you'll need:
For the deck fascia material, Inteplast has 12 colors to choose from and solid, variegated colors all with wood-grain patterns. I used their Terra Cotta material to build mine, but choose a color and style to suit your tastes, or compliment your existing deck or trim at home.
The first step is to cut the necessary pieces. Start with the 4x4 Inteplast PVC “J” Channel trim to and cut four 12” pieces. Next, pre-install the screws at the ¾” square notch ends on each “J” Channel. Place the screws 3/8” from edge to ensure the holding capacity.
Next, trim the Inteplast Deck Fascia Board to 4 pcs to 2’ long each. Now, align the bottom of the Deck Fascia and “J” Channel, then attach them together with the screws at the four corners. You’ll want to use proper blocking to level the joint before you apply the screws. I enlisted the help of my friend Eric to press the corner board against the fascia for a tighter hold. But if you don’t have a friend in sight, you can use a grip to help add pressure. Next, join the pieces at the corners.
Continue until all corners are joined and you have a square. Finish up by adding the 4” x 4” end caps on the top of the remaining ½” tip of Inteplast PVC “J” Channel. If you use PVC end caps, apply PVC cement to bond the cap. That’s it!
You can make your box any size you like. The diagram below is for a rectangular 2’ x 4’ planter box.
To find Inteplast’s fascia and corner board in your area, check out the Inteplast Building Products product locator tool. What do you think of what I planted in mine? Let me know what you’re gonna plant. Thanks for reading.
Martin (and Harley)