If you ask homeowners, most will probably tell you they don’t have enough storage space. As much thought as designers and builders put into storage options, there will always be a need for more—especially if you live in an apartment or condominium. So when your space is feeling cramped or cluttered, and your closets and drawers are maxed out, here are 4 DIY storage hacks to try.
1. Picture Rail Shelves
Not only does decorative picture rail moulding add character to any room, it also gives you more storage options. You can use the floating shelves to store photos, candles, or books, just about anything. Install them in a laundry room where you can store your detergents or other cleaning products. It’s an easy project to tackle on your own. Here’s how.
2. Hidden Storage Cabinet
House and car keys typically get tossed on an end table or the kitchen counter because we don’t have a designated place to keep them. Here is a unique DIY hidden storage cabinet that doubles as a picture frame. You can make this as stylish as you want from Inteplast’s varied color and profile selection of moulding. It’s perfect for keys or any other small items that don’t have a designated storage space. Follow these simple instructions.
3. Wine Rack
While it would be nice to have a separate wine cellar or even a state-of-the-art wine cooler, not all of us have that extra space to spare in our houses, so our wine bottles typically sit in a pantry or on the counter. Here’s a DIY wine rack project that hangs on the wall. It’s super stylish and it’s also a great gift idea too.
4. Coat rack shelf
Not every entry way has a coat closet, which can often mean jackets, coats, scarfs and the like get tossed over chairs or hung on door knobs. Here’s a an easy, DIY coat rack and shelf made from Inteplast’s decorative moulding that not only adds a place to hang garments, but also has a shelf to add knick-knacks, photos, or anything else that needs a place of its own. Get directions here.
When we think of curb appeal, we most likely think of beautiful flower gardens, neatly trimmed, emerald lawns, freshly painted siding, and a couple of white rockers swaying on the swept front porch. Of course, it’s all that and more. Adding architectural details to the curb-side of your house not only adds value if you were to list your home, but adds visual interest that makes your home stand out among all others. Here are some unique architectural elements using Inteplast Building Products Exterior Trim products that we bet you never considered.
Arches and Curves
Not just for interior doorways, arched and curved trim can make a huge aesthetic impact on the outside of your house too. Inteplast’s trim has all the visual appeal of wood, without the natural flaws, but it also has more design flexibility because of its heatability. You can create custom shapes and curves through an advanced heat-bending process for unlimited craftsman applications. In addition, IP’s embossing technology keeps the wood grain patterns intact during the heat bending process to maintain the authentic looking wood texture. Inteplast’s trim board can be shaped and bent to finish off curved decks and porches, archways, and circular or oval window surrounds.
Cornices and Columns
Once historical staples of home construction, cornices and columns are popular in modern designs as well. These architectural millwork products are not only for load bearing applications, but they’re often used for pure decoration. Jazzing up the eaves of a porch or overhang with Inteplast’s decorative, moisture-resistant millwork products you can create some low-maintenance drama with cornices, columns, and brackets in an economical way.
Today’s farmhouse interior style is country without the tacky, comfy without the clutter, and traditional without the frilly. With some weathered wood-look details here and some upholstered headboards there, you can easily pull off a modern farmhouse look with minimal effort and maximum style. Here are 5 ways to pull off this style.
Weathered Wood Look
A fundamental element for the modern farmhouse style is reclaimed or barnwood details because it creates a warm, cozy feeling. You can get that feeling by creating a feature wall in your bathroom, or any other room. But in addition to being expensive, reclaimed wood comes with some issues, like color and grain inconsistencies, the need for lots of nails, possible rot and mildew if used in high moisture areas, and let’s not forget the pests and splinters. Inteplast offers a completely removable and replaceable Accent Wall Planks, which you can buy online at Lowe’s, without all the hassles.
One way to get a modern farmhouse kitchen is to incorporate open shelving. It serves a couple of purposes. First, it’s functional, especially if you’re a cook who spends lots of time in the kitchen. No more opening and closing and opening and closing cabinets. Also, if you have decorative dishes and glassware that you think of as works of art, open shelving is the best option to show them off. You can DIY your own shelves using Inteplast Building Products Moulding and Trim Board—which you can purchase at Lowe’s or other select dealers. They come in a variety of colors and profiles to suit any style.
Fabric or upholstered Headboard
Whether you make one for a guestroom or your own master bedroom, or every bedroom in the house, a fabric headboard framed in decorated moulding is the essential farmhouse touch. It’s an easy DIY project that’ll make your guests feel comfy, relaxed, and welcomed. Using Inteplast’s prefinished moulding, you can create a frame that attaches directly to the wall behind your bed for a cozy focal point. This moulding is in mahogany, but they have lots of colors to choose from.
Make front-porch sitting even more pleasant by covering the ceiling with Inteplast’s Beadboard. It embodies the charm of a sophisticated, modern farmhouse and instantly adds a bit of historic charm. Not just for porches, Inteplast’s Beadboard is the perfect alternative to covering up outdated popcorn ceilings. Beadboard can also add farmhouse style to walls, kitchen islands, and cabinetry, and furniture. And, unlike traditional wood beadboard, Inteplast’s product requires very little maintenance. No scraping and painting necessary.
Your sense of style makes you, you. From a love of arched doorways to a passion for elaborate crown moulding, at Inteplast we make the products that reflect your unique, personal tastes. Because we know that moulding and trim doesn’t just soften the transitions between ceilings, walls, floors, and windows, but instill character to every room, we give you options. Not sure what your style is? Here is some inspiration to help you decide.
1. Let the Sunshine In
Nothing increases the natural reflectivity of the sun in a room than a white backdrop and large windows. This combination of design aesthetics can make a room feel larger and more open. These windows are trimmed with White moulding, and the ceiling is planked with White trim.
2. Create a Cave Worth Exploring
It may be a man cave in the basement, but that doesn’t mean you have to leave it unfinished and devoid of personality. This one looks very modern and grown-up with its clean lines created by using Autumn moulding from the ceiling, to the chair rail, to the baseboards. You can even use the moulding to frame wall art or memorabilia.
3. A Not So Deserted Island
The kitchen island often becomes the social hub of the house. Homework happens here. Monthly budgets happen here. And of course, some snacking occasionally happens here. This kitchen is cozy and inviting with Crystal White moulding and beadboard, and is perfectly complimented with Ultra Oak moulding.
4. Build it Up
Puny is out when it comes to window frames. This built-up window using Crystal White moulding and corner blocks adds an historic flavor to this bathroom that narrow profiles can’t pull off.
5. Old-World Wall Charm
Nothing echoes old-world craftsman style like a wall covered in wainscoting. It’s one of those architectural details that can transform a room into another time no matter if your style is modern, farmhouse, or something in between. This living room uses Crystal White moulding and trim to create the look of original wainscoting. Integrate some modern finishings and Auburn window moulding and you have some classy digs.
Watching the temps plunge this week sure does feel like the winter season is finally upon us—which means the holidays are right around the corner. Which also means I’m in a festive mood for some DIYing. If you saw my Fall Sign project post back in October, you know I like my holiday signs. Decorative holiday signs are some of the easiest ways to add creative touches—that aren’t over-the-top—to your front door, front porch, entry wall, fireplace mantel, or anywhere else you want a pop of holiday cheer.
Lately I’ve been using Inteplast Accent Planks from Lowe’s for a ton of home decorating and crafting projects as well. So I had some leftovers (from a cool project I’ll share in January) to create this Christmas sign. The planks come in five color kits: Sierra Brown, Reclaimed White, River Grey, Whitewashed Pine, and a multi-color kit. And for those who can’t quite make up your mind, they have a multi-color kit, which is what I used. Here’s how to do it:
Materials you’ll need:
Being the multi-crafter that I am, I have a handy-dandy Cricut (pronounced cricket) die cut machine, so I made my own “All is Bright” decal. But you can find some amazing decals online in shops like Etsy.
First, I cut the Accent Planks to the length I wanted them. You’ll want to consider the size of the Accent Planks when choosing your frame size so you don’t have to make too many cuts. I had to rip cut one board to fit because I used an existing frame I had. You’ll also want to make sure that the depth of the frame allows for the planks. I actually had to tape the back of mine because my frame was just a tiny bit too narrow. But hey, it’s the back, nobody will see it.
Next, cut your own lettering if you aren’t using a premade decal. If you order your decal on line, make sure the dimensions will fit inside the visible area of the frame. And of course, the same goes for if you are making your own decal as well.
Before you apply the vinyl design to glass, clean the glass well. If there is any debris on the glass when you apply the vinyl, trust me, you’ll create visible bubbles in the vinyl, and once they’re on there, good luck getting them out.
Lay the vinyl decals on the glass and determine where you want to place them. Use a cutting mat or measuring board of some type to make sure that your glass is level and centered before applying the vinyl.
Next, apply the vinyl as directed by the manufacturer. If you are a Cricut user, you know to use your transfer tape.
Then, place the Accent Planks into the frame over the glass. Finally, apply the backing, turn it over, and decide whether you are going to give it away as a gift or save it for yourself. I still haven’t decided, but honestly, it’s such a quick and easy project, I still have time to make another one and keep it for me!
That really is all there is to this project. It’s quick, it’s fun, and there’s no limit to the rustic-looking holiday décor you come up using Inteplast Accent Planks. They’re beautiful, inexpensive, and come without the splinters! So here’s to making a DIY list, and checking it twice, ‘cause there are only a few days left to create for everybody who’s nice. Thanks for reading!
When I was a kid my parents took me on a trip to Graceland—Elvis’s mansion in Memphis, Tennessee for those who live under a rock. I have to admit, I had no idea who Elvis was at the time, but when I got there and saw the shag green carpet on the walls, I became a fan. I begged my parents for months after that visit to let me put carpet on my walls. They said NO. Now as an adult, my tastes have evolved. So when a friend wanted my advice on creating an accent wall (she was unaware of the carpet request or she probably wouldn’t have asked for my opinion), I told her about Accent Planks from Inteplast Building Products, available at Lowe’s. They’re inspired by the weathered look of reclaimed wood, but they’re made from PVC so no splinters or bugs to worry about. They are easy to install, moisture resistant, and completely removable. I offered to help my friend install the planks, but she said, “no way, I got this.” Here is how easy it is to do yourself.
First, figure out how many Accent Planks you’ll need. Measure the height and width of the wall to calculate the required square footage. Each kit of planks covers 15 square feet. Remember to acclimate the planks to your room temperature at least 24 hours before you install them.
Next, wipe down the wall you want to install the planks using isopropyl rubbing alcohol. Don’t use general household cleaners because they can be too harsh. If you recently painted the wall, make sure you wait seven days before installing the Accent Planks.
Now comes the fun part. Figuring out the pattern orientation. These Accent Planks are versatile and you can run them horizontal, vertical, or even a herringbone pattern. It’s a good idea to map out an area on the floor the same size as the wall you’ll be covering and arrange the planks to determine the balance of color and pattern before you install them. There aren’t any rules: you can run the grain patterns in the same direction, or opposite direction.
Once you have the layout arranged, it’s time to cut your planks to make them fit. The cool thing about Inteplast’s Accent Planks is they can be trimmed using a chop saw, a table saw, or a fine tooth miter box saw. No special tools needed.
Then, at the top of the wall where you plan to start your planks, use a level and a pencil and draw a line on the wall to use as a guide for your starter row of planks.
Oh, I forgot to mention…no hammer or nails needed. Inteplast’s Accent Planks are installed using Command® Picture Hanging Strips from 3M®—which are included with each kit. You can however use construction adhesive or finishing nails if you want the planks to be permanent.
Place adjoining planks at varying lengths leaving a 1/32” gap between planks to allow for expansion. Continue until the first row is complete. Offset the second row 6-12” or as desired to achieve an appropriate design. Repeat until the wall is covered.
And if you thought it couldn’t get any easier, check this out. Inteplast’s Accent Planks are completely removable. So if you get a plank crooked during installation, or you don’t like the color plank you just placed, just remove it and replace it.
Carefully lift the bottom of the plank, pull it up and away to expose the Command® fasteners. Don’t pull the planks straight off because it can damage your wall. Adjust the plank ore replace, then push the plank back onto the fasteners and push at each strip until you hear a click.
To completely remove the strip, grip the tab and slowly stretch the strip straight down against the wall until it releases, about 12 inches. Don’t pull the strip towards you.
That’s it! A quick and easy do-it-in-a-weekend project.
Inteplast’s Accent Planks are practically maintenance-free. The PVC substrate means they’re water resistant, which makes them a great product for high-moisture areas like bathrooms, laundry rooms, and kitchens. For occasional cleaning, just use a mild soap solution on a damp cloth and wipe dry.
These Accent Planks are a great option to transform regular walls into conversation pieces. Not that green shag carpet wouldn’t be a conversation starter, but this option is a little more practical. Thanks for reading, and always, I’m here if you want to talk shop.
Ever walk into someone’s house and just drool a puddle on their carpet as you stare mouth-gaped at the beautiful, thick, or wide moulding that seems to cover every square inch? I don’t mind telling you that I have been known to do it. The old saying goes what’s old is new again, and that definitely applies to the style of today’s moulding. Moulding found in period homes of the 18th and 19th centuries tended to be wider, thicker, and more ornate compared to the more narrow, let’s just say it—boring and flat designs—of the 20th and first part of the 21st centuries. But with a trending taste towards old-world craftsmanship details, wide and thick are in again. Alas, that doesn’t mean you have to rip out every inch of moulding and start from scratch to have a hip house. Build up what you’ve already got. By combining several moulding profiles you can create looks inspired by historical periods with a fresh, modern vibe—from floor to ceiling and everything in between. Inteplast Building Products prefinished moulding, which you can buy at your local Lowe’s, has several profiles and prefinished colors, perfect for creating these DIY custom-look buildups.
Crown Moulding Buildup
You may think crown moulding’s only function is to cover up that wall paint you got on the ceiling, but that’s only a fraction of the power crown can have on a room. A single piece of moulding can do the job, but if you want to make a statement—whether traditional or something more ornate—putting three moulding profiles together will get you what you’re after. Ken O’Brien, author of the Joy of Moldings blog, offers tips and step-by-step instructions on installing three-piece crown moulding.
Moving our way down the wall, if you’re stuck with a fireplace from the minimalism design trend, you may not even have a mantel. Or you could have a fireplace that just has a so-so mantel that needs some pizazz. Using a moulding buildup, you can create a historically inspired, more substantial mantel that can make your fireplace the focal point of the room—even when there’s no fire. The folks from JLC Online show you how to build a Federal style mantel buildup, or check out Binkies and Briefcases DIY floating fireplace mantel that’s a bit more traditional with some small ornate touches.
Just because they’re near the floor doesn’t mean they shouldn’t stand out. Just like crown moulding, tall baseboard moulding designs add character and a bit of historic charm to any room. By adding a second piece of moulding, or heck, even a third, you can create modern farmhouse looks or romantic Victorian looks by stacking baseboards and shoe moulding pieces. Visit the Joy of Moldings blog again for how-to’s.
Mirror and Picture Frame Moulding Buildups
Do you have a not-so-standard size photo or piece of art that you’d like to frame, but can’t find an off-the-shelf frame to fit the dimensions or your style? How about a bathroom mirror that’s losing its reflective coating from the edges? By building up moulding, you can create your own custom picture or mirror frame in using traditional profiles or more ornate ones—depending on the look you’re after. The folks from Reality Day Dream show how they did created a picture frame using three different moulding profiles.
The power moulding has to transform a home is almost unbelievable. With just a couple of Inteplast’s prefinished profiles from Lowe’s, you can add to what you already have, creating a more substantial moulding reminiscent of days gone by—whether it’s on your ceiling, your floors, or hanging on your walls. Happy moulding, and thanks for reading. As always, let us see what projects you’re working on. And visit our Pinterest page for more ideas.
Hello my fellow DIY friends, Andrea here with you this week. This fall project is sooooo easy, you’re gonna say: ”This can’t be all there is to it.” Well, it really is that simple. In fact, you can start on it five minutes before Thanksgiving guests arrive and still have it done in time to cook the Turkey. I wouldn’t recommend waiting until then to do it. But you could if you wanted to.
Last month I tackled a weathered wood-look headboard using Inteplast Accent Planks that I purchased from Lowe’s. I had some planks left over so I decided to do a quick fall décor project. I have a couple more planks left over, so stay tuned for an easy-peasy Christmas-themed project idea coming up next month. So, without further ado…ta-dah, here it is!
Now, I have a Cricut (pronounced cricket, yep, like the insect) die cut machine so I created all of the die cuts. But you can just as easily do this with some wall decals that you can find online in shops like Etsy. Here is a link to decals for the word Thankful , and here is a link to fall leaves decals. Just make sure the size of the decals fit your accent plank, or planks if you use more than one.
For this project, I used an accent plank in Sierra Brown, but there are several other color options to choose from: Reclaimed White, River Grey, and Whitewashed Pine. And for those who can’t quite make up your mind, they have a multi-color kit that includes 4 Sierra Brown, 3 River Grey and 3 Reclaimed White.
One of the best things about these Accent Planks from Lowe’s is that you hang them using Command™ Strips from 3M. That means there is no damage to the wall or the plank when you take it down at the end of the season. Also, if you don’t like where you put it, you can take it down and rehang it somewhere else.
So, here’s all the materials you need:
Then, lay the decals out on the board and determine where you want to place them.
Then, you peel off the backing and apply the decals to the board. Once your lettering and leaves are in place, apply the CommandTM Strips from 3M and hang the sign on the wall.
I promise you, there are no hidden steps that you’ve missed. I told you it was easy. I wish you all the fun and joy of trying this project for yourself. It’s definitely one of those that you can let the kids do as well. See how creative you can get for the holidays. Thanks for reading!
Accent walls are all the rage right now. That makes me smile because I do love an accent wall. But don’t give me a can of paint and a roller. Sure, painting is an inexpensive way to highlight a wall but the impact could be much more dramatic with some textured materials in a unique pattern. If you want to add some visual KAPOW to your walls, experiement with patterns and materials. You could use brick, stone veneers, or wood planks to break up a boring room, but they’re heavy, messy, and require a lot of tools. I’ve found that Inteplast Building Products Accent Planks in a weathered wood-look from Lowe’s are the perfect material because they’re beautiful, easy to install, and a friend of the wallet. And they’re so versatile you can experiment with different patterns to really reflect your style. Let’s explore four patterns here.
OK, so it’s been done. You lay your planks left to right, like the horizon. But that doesn’t mean you can’t do it great. One of the cool things about Inteplast’s Accent Planks is their multicolor kit. The kit covers 15 sq ft and includes 10 planks – 4 Sierra Brown, 3 River Grey and 3 Reclaimed White. By alternating the three different colors, you can create an inspiring horizontal pattern the likes of which no one has seen!
Now, we’re getting a little edgier. Vertical patterns, where you lay your planks top to bottom, maybe aren’t as common on the walls as they are floors, but that doesn’t mean you can’t do it. In fact, I dare you!
Want to get even crazier? Try a herringbone pattern. This pattern is named after its resemblance to fish bones. Think Herring fish. This design might look intimidating, but what most people don’t know is that it doesn’t involve many complicated cuts—just straight off of a corner at the ceiling or floor. This pattern will be sooooo worth it when you see the final results!
Mix and Match
If you feel you’re ready for the ultimate pattern challenge, why not mix and match a couple of them to create an amazing, one-of-a-kind accent wall? How about a sort-of-herringbone and horizontal plot twist? Inteplast Building Products Accent Planks are so easy to work with and easy to cut, you’re only limitation is your own imagination.
If you’re ready to get started…
Here’s what you need
Here’s what you DON’T need
Because Inteplast’s Accent Planks are completely removable and come finished and ready to install, you don’t need a lot of items that you would if you used other traditional products, like:
Here’s what you do:
First, sketch out your pattern. Don’t worry, you don’t have to be an artist or hire yourself a professional designer. Just rough out what you want it to look like and start from there.
Next, measure your wall. This is where you’ll start to add real-life dimensions to the pattern you sketched.
Now, depending on the pattern you go with, where you start may be different. But for starters, finding the center, using it as your starting point, and working out from there will be the crucial first step for most patterns.
Using a chalk line and/or a level, draw a vertical line and a horizontal line through the center of the wall to give you a visual reference before installing your planks.
What unique patterns can you come up with? We love pictures around here so send them on! As always, thank you for visiting Design Next Door.
Hello everyone, Jennifer her with you on this early fall day. As I’m in the start of having some pre-holiday home improvement projects done, I was thinking: Have you ever watched someone install moulding with a nail gun and wondered if they have ever performed as a contortionist in the circus arts? I’m in awe of the complex maneuvering, limb twisting, and equipment handling they go through to so expertly attach moulding to walls, ceilings, floors, and windows. But if you use Inteplast Building Products prefinished, decorative moulding from Lowe’s, nailing isn’t necessary. It can actually be installed with construction adhesive, unlike most other traditional moulding products, because they’re made from high quality polystyrene which means they’re light weight and flexible. So you don’t get the typical frustrations of installing other substrates—like filling nail holes or nailing upside down. The installation process is so much easier, and it’s as simple as measure, cut, and adhere.
Of course, I’m not the DIY type, so I’m sure I’m making this sound much simpler than it is, but the point is, the installation process is easy to do. The first step of course is to determine the height placement on the wall for chair rails, or ceilings, whatever project you’re working on. Once you’ve determined the measurements, use a level and a pencil to mark a line around the room as a guide for installation.
Inteplast’s polystyrene decorative moulding products don’t require additional saw blades or other tools to cut. You can use the same equipment as traditional wood products. Once you’ve got the dimensions you need, make your cuts.
Apply the contact adhesive to the back of the moulding and to the wall, maintaining at least 1/2" from the edge of the moulding. Let the adhesive air-dry for a few minutes until it gets tacky, and then place the moulding on the wall. Grab your next piece and repeat. Adhesives instead of nails give you a cleaner appearance.
Once the moulding has been installed, you can fill all the joints and splices with caulk if you desire. After installing crown moulding it’s helpful to add a bead of caulk along the ceiling and wall edges to hide any imperfections.
As simple as 1, 2, and 3, here’s what you get:
As always, thank you for reading Design Next Door. Please remember to share your project photos and ideas with us. Looking for some home improvement inspiration. Visit our Pinterest page.